We are engaged in manufacturing a wide assortment of Drive Panel etc.
Motor Control Panel
  • Motor Control Panel
  • Motor Control Panel
Automatic Panel

Product Details:

APFC Panel (Automatic Power Factor Control Panel) are mainly used for the improvement of electric power factor. As the time is passing the electricity has become a bit costly, so it is important for reduction of power consumption for future expenditure. ADFC panels are used for these purposes where a large amount of electrical load is supplied. There can be an operational loss or a penalty from an electricity board. So for such problems APFC panels are required so that high Power Factor is maintained. ADFC is available in different current ratings to provide with different applications manufactured by the Electrical panel manufacturer.

Applications Automatic Power factor correction equipment, turned capacitor banks, dynamic PFC
System 415V 3 Phase, 3 or 4 wire, 50Hz
Rated Power Up to 1200 KVAR
Rated Voltage Capacitor
Rated Insulation 1000v
Rated Service Voltage 690v
Ambient Temperature
45 Deg C
Short Time Current
50KA for 1Sec, 105KA peak
Degree of Protection
Form of Separation
Up to 2B/3B
Type Tested for
Short Time Current withstand Temperature Rise Degree of Protection
Bus Bar Aluminium or Copper
Feeder Configuration
Semi Drowout or fix type
Cooling Natural / Forced
De-tuning Conventional or 5.67%-7% or 14%
Contractor / Thysistor
PF Control
Both manual and Automation through APFC relay up to 20 stage